How to fly RadioLink F450
Here is the transmitter T8FB, which is powered by a 2S lipo battery. Make sure the polarity is not reversed.
Power on the transmitter.
After the setting of mini pix is complete, and it can be armed in Mission Planner. Then you can install the propellers.The arrow on Mini Pix indicates the head of the plane. Here is the head. Put it forward. Make sure motor 1 and motor 2 turn counter-clockwise, while motor 3 and motor 4 turns clockwise. And fix the battery of F450 with a band.
Connect the battery of F450
Mini Pix is self-checking. When the blue or green LED flashes, the self-check is complete.
Arm F450. Long press safety switch. When the red LED is always on, the arm of F450 is finished.
Arm the transmitter now.It is stick mode 2, with throttle on the left joystick. Push the throttle stick to the right bottom for 2 seconds.A beep sound can be heard from the aircraft and the propellers start to spin, which indicate the arm is successful.
It is Alt-hold mode now. Slightly push the throttle above the central position and F450 will take off. When the aircraft reaches a certain height, push throttle stick back to the central, F450 will remain at the height.
Slightly push throttle down to land the aircraft. Once landed, the motors won’t stop immediately.Wait until the motors stop completely, and then disarm the transmitter. Push the throttle stick to the left bottom for 2 seconds to disarm it.
Now the flight is finished. Long press safety switch until the red LED flashes. Unplug the battery. Finally power off the transmitter.
Note: If the flight control cannot be armed, hold F450 and turn it around in the air to eliminate the interference. If it doesn’t work, you can arm it in a place where there is no interference. If it still doesn’t work, connect Mini Pix in Mission Planner. Arm and check the reasons for arm failure.And follow the notice to solve the problem. For details on how to download and install the Mission Planner, please check the detailed manual of Mini Pix. (
https://www.radiolink.com/minipix_manual)For more details of RadioLink F450:
Purchase link of RadioLink F450:
You can send mails to after_service@radiolink.com.cn if you have any questions during using our products.
#quadcopter #multirotor #radiolink#f450