⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠
Needed parts:
- Clutch screws : Go to a Stellantis dealer
💪 TIGHTENING TORQUES FOR CLUTCH KIT CITROËN C3 mk1 1.4 HDI
- Clutch screws : 20 Nm
- Gearbox retaining screws : 55 Nm
- Gearbox bracket screws : 54 Nm
- Gearbox bracket screw on engine : 60 Nm
- Control arm ball joint nut : 66 Nm
- Hub nut : 245 Nm
- Clutch sender screws : 30 Nm
- Anti-jamming bar screws : 66 Nm
Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Clutch kit on a Citroën C3 mk1 1.4 HDI.
Discover the world of UseTool EN
Needed tools:
- 30mm socket
- Torx E14 socket
- 16mm spanner
- Small socket wrench
- Socket wrench
- 8mm spanner
- Flat head screwdriver
- Wheel lug wrench
- 10mm socket
- 13mm socket
- 16mm socket
- Torx T40 socket
- Torx T50 socket
- Gimbal
- Extender
- Needlenose pliers
- Piece of tissue
- Wire brush
- Iron bar
- Exhaust clamp pliers
- Clamping clip
- Torx E8 socket
- Magnet
- Breaker bar
- 8mm Allen socket
- Fork tool
- Torx E7 socket
- Hydraulic jack
- Axle stand
🚗📢💡 RESOURCES 💡📢🚗
Usetool's warnings
When you change a clutch, it is important to also replace the clutch release bearing.
Usetool's info
- In order to reinstall the clutch on the flywheel, the clutch disc and housing need to be perfectly centred.
It is therefore imperative that you have a clutch centring tool, something you can find in the description of the video.
- Changing the clutch requires to remove both cardan shafts.
The gearbox must therefore be bled, so that oil does not spill everywhere.
📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.
0:00 Intro
0:15 Remove components from under the vehicle
4:06 Lift the vehicle
4:39 Remove components from under the vehicle
9:00 Remove the gearbox
14:58 Remove the clutch
15:41 Install the new clutch
17:30 Replace the clutch release bearing
18:26 Refit the gearbox
23:15 Put the elements back in place